TUGGY Skrevet 27. februar 2011 Forfatter Del Skrevet 27. februar 2011 well yesterday i finished the new fuel tank and mounted everything,,,put diesel in and fired her up,,,she runs like a swiss watch so now i can finish the wiring and the new bonnet cover and the painting and the new seats,,,,oooohhh it will never be ready,,,, and i have been playing off road all day,,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
Bjurbeck Skrevet 27. februar 2011 Del Skrevet 27. februar 2011 ...and i have been playing off road all day,,, Did you break your camera doing that? We want pictures and video of a swiss-watch-running-diesel-101 Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 28. februar 2011 Forfatter Del Skrevet 28. februar 2011 Did you break your camera doing that? We want pictures and video of a swiss-watch-running-diesel-101 ja,ja,ja,ja,,,,,ok see what i can do,,,,,,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
JefeDeMaquinas Skrevet 19. mars 2011 Del Skrevet 19. mars 2011 Hi There! You reall have a great project going there, especially impressing is your paintjob, few around that go to that extent. Been some days sine I was done in Your corner of the World, will make sure to check it out in person once I get the opportunity Those N-A tours you mentioned, are they "pay as you go along"-trips? Details would be great :-) Keep up the brillinat work!! Greets Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 19. mars 2011 Forfatter Del Skrevet 19. mars 2011 hi greets, im not quite sure what you mean if you want to go on a raid just call me and we can slot you in,,,and any time come and have a look,,,,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 19. mars 2011 Forfatter Del Skrevet 19. mars 2011 (endret) ok,,just tried to bleed the clutch,,,it wouldnt pump,,so stripped the master cylinder out and it was siezed solid,,it had been standing for at least 3 years, ,,so just looked on craddocks site for a new one,,,and guess what,,,,they no longer stock them,,,,bugger,,,, so i am going to have to adapt a range rover one if i can,,,,,more work,,,,, , also i have a page on face book check out tugs 4x4 morocco raids Endret 19. mars 2011 av TUGGY Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 23. mars 2011 Forfatter Del Skrevet 23. mars 2011 OOHHHH its been a good day... .......i managed to retrofit a range rover clutch master cylinder into the 101 its the one off the donar vehicle,,,,so i managed to bleed the clutch,,,i started the engine and put it in gear,,,,nothing,,, aaarrrr put the high-low range in,, ,,,,dipped the clutch and let it out slowly and it moved,,,,so for the first time in maybe 3-4 years she moved under her own power,,,,,smooooooth as silk,, ,,,,,result,, , Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
JefeDeMaquinas Skrevet 24. mars 2011 Del Skrevet 24. mars 2011 My Congrats are in order! Happy for you that things are really starting to roll Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 25. mars 2011 Forfatter Del Skrevet 25. mars 2011 ok today i am sorting the charging circuit,,,, and trying to do some electrical stuff,,,,i hate doing electrics,,,,,anybody with the know how want to come and do them for me,,,,,,, i will give you lots of coffee and eggy banjo,s,,,,,,,,,,,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
1120td5 Skrevet 29. mars 2011 Del Skrevet 29. mars 2011 When I got into the world of land rovers, I realised that a non-smoker as I am, every good job needs a rewarding miller or good chilled beer to wash the dust residues in my throat!! ;) Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
Harmen Skrevet 31. mars 2011 Del Skrevet 31. mars 2011 (endret) Nice project! Endret 31. mars 2011 av Harmen Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 3. april 2011 Forfatter Del Skrevet 3. april 2011 ok just a quick update,,,drove her out of the garage and washed it as there was a great deal of dust and muck on it from where it had been standing, ,,will bleed the brakes this week some time and pipe up the inter cooler then i can start on the paintwork on the body work before i fit it out,,then i can do all the electrics,,,,,still lots of work to do, ,,but i can see the light at the end of the tunnel now,, ,,i think,,, , Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
@le Skrevet 4. april 2011 Del Skrevet 4. april 2011 Nice! I like the weather too... Do you have a color code system? Steering and suspension: Blue... Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 4. april 2011 Forfatter Del Skrevet 4. april 2011 yes i thought i would keep the springs and steering components blue i quite like it against the black chassis,,, ,,,but i dont know what colour to paint the body,,,, ,,,,,thinking of desert sand,,, ,,,,,i dont know,,,any ideas what would look good,, ,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
Bjurbeck Skrevet 4. april 2011 Del Skrevet 4. april 2011 Will you keep it with the canvas or build a box body? Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 5. april 2011 Forfatter Del Skrevet 5. april 2011 no i am going to build a box on the back and it will become my overlander,,,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 13. april 2011 Forfatter Del Skrevet 13. april 2011 quick update,, ,,,took if for a run up the road today,,,back propshaft is binding and something is wrong with the clutch im getting judder so think i have to realingn the rear axle and propshaft fit a new clutch and i have wear in the front swivel pins,,ordered new parts from craddocks,,, ,,,,,so still lots of work to do,,,,, , Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 27. mai 2011 Forfatter Del Skrevet 27. mai 2011 ok quick update,,,, cut all the brackets off the rear axle realigned the axle so as the prop shaft has minimum angle then re weld all the brackets back on ,,,what a ball ache,, reconnect the brake pipes and bleed,,,best brakes iv ever had on a 101,,,and it stops,,,, pipe up the turbo,, start putting the panels back on the front body work,ok see if i canpost some pics this weekend,,,,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 1. juli 2011 Forfatter Del Skrevet 1. juli 2011 /Users/kevincardno/Pictures/iPhoto Library/Masters/2011/07/01/20110701-103744/DSCF4597.JPG Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
JefeDeMaquinas Skrevet 1. juli 2011 Del Skrevet 1. juli 2011 (endret) It is most impressive to see the amount of work You put into your truck I personally find the 101`s very pretty in dark green. Considering it should be your overland truck though, the Libyan Sand color offered by LR is a definate option May I suggest You spray the rooftop white? Not in order for it to match a Defender but to minimize heat impact while runing about in those hotter climates you`ve adopted Realy fine 101`s are becomming more and more rare, so its is tickling to see how it comes along Endret 1. juli 2011 av JefeDeMaquinas Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 2. juli 2011 Forfatter Del Skrevet 2. juli 2011 well i have managed to get a couple of days on the old girl this week,, ,i needed to paint the cab inside so i could fit the modified dash board and start the wiring so i started to rub the old paint off,,,it took me all day and what a messy job 3-4 layers of paint,,aaahhhhh so found some paint,,,not sure what it is because its all writen in spanish,,,but its like hammerite sort of paint,,touch dry in 10 mins but its for all sorts of metal and will spray which is good and it seems to do the job,found this nice red like a crimson i wasnt sure of the colour but now its on it looks quite nice,,,,,i like colours,,,,,so black hood red body and black mach six wheels it should look quite good,,,ok see if i can get moor done this week end,,,just need it finished and on the road,,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
JefeDeMaquinas Skrevet 2. juli 2011 Del Skrevet 2. juli 2011 Certainly looks good ;-)! Don`t know if its me (recently whiped my glasses) but that last pic of Yours seemt to me lika a shiny orange. Despite the "municipality-touch", bright orange could do the trick as well :-) Come to think of it; There was recently for sale a very straight green 101 in Germany but its off the marked now. Not attempting to be smart here, but is there a new design out that I havent heard of as you state Mach six wheels? Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 2. juli 2011 Forfatter Del Skrevet 2. juli 2011 Certainly looks good ;-)! Don`t know if its me (recently whiped my glasses) but that last pic of Yours seemt to me lika a shiny orange. Despite the "municipality-touch", bright orange could do the trick as well :-) Come to think of it; There was recently for sale a very straight green 101 in Germany but its off the marked now. Not attempting to be smart here, but is there a new design out that I havent heard of as you state Mach six wheels? look on page 2 of this thread and you will see my new mach 6 wheels,,,the bright orange is the undercoat not sure if it needed it but its given it a bit more body,,,,ja,ja,ja,,,,no pun intended,,,,, ok its hot sunny and after beer oclock,,,,so BBQ time,,,,,,yeee haawww Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
JefeDeMaquinas Skrevet 2. juli 2011 Del Skrevet 2. juli 2011 Goes to show, the first thing to go blind are those two upper slot in my forehead Saw the pic & get the drift; Mach 6 are 6 studded Mach 5 are 5 studded Taught myself something today Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
TUGGY Skrevet 8. juli 2011 Forfatter Del Skrevet 8. juli 2011 OOOOOOHHHHHH yes,,,,,,had 3 days fettling the old girl,,,, , new fuse box,all new lights,indicators working side lights all working stop light system all working dash board in and all gauges working,,,windscreen all cleaned and fitted,,,so just the front bumper to fit,,some more paint doors and door tops then fit the rear body,,,and were nearly there,,,then theres the snagging,,,,,, post pics tomorrow,,,,,, Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
Anbefalte innlegg
Bli med i samtalen
Du kan publisere innhold nå og registrere deg senere. Hvis du har en konto, logg inn nå for å poste med kontoen din.