sten.hernes@gmail.com Skrevet 26. april 2018 Del Skrevet 26. april 2018 In the process of changing a top gasket on my 1996 P38 Range Rover 2,5 DSE, the camshaft was removed. On reinstalling, I used too much moment/torque on the M7 nuts, and some of the pinbolts (studs) were damaged. As far as I know so far, the bolts elongated in the free zone, and one snapped, but the stub could be unskrewed from the aluminimum top.My studs are fully threaded, but the parts catalogue show bolts threaded at both ends. I hope those may be interchanged. I thought it better to change all 14 pin bolts. The dimension is Stud-M7x45 with STC 2387 parts number, but apparently not available. Now: The challenge is to find new Studs (pin bolts), perferrably fully treaded, or treaded at each end. Can anyone help me getting those bolts? Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
GuttormG Skrevet 26. april 2018 Del Skrevet 26. april 2018 ? Tast delenummetet i google og shop i vei.. Siter Lenke til kommentar Del på andre sider Flere delingsvalg…
Anbefalte innlegg
Bli med i samtalen
Du kan publisere innhold nå og registrere deg senere. Hvis du har en konto, logg inn nå for å poste med kontoen din.